The main enemy is the hot computer processor. From here we must be to reduce the heat generated by the processor. It is not much that can be done to reduce processor heat, but at least we can reduce it even though only a few degrees only.
There are some tricks you can try to reduce processor heat, namely:
- Use the HSF (heat sink fan) is good. Find a dasarnnya material derived from copper. Copper is a material easy to absorb heat, but also easy to remove heat. Search also the larger size, because of course the amount of heat can be absorbed more.
- Use a fan with a large but with slow rotation. The air can be formed with larger big fan, but with a slow rotation would reduce noise from the fan itself. So as much as possible seek to spin slowly, so that noise generated does not disturb your work.
- Use the paste between the processor with HSF. This is to eliminate the air stuck between the processor and HSF. The air is a bad conductor of heat, so if there is air in between the processor and the HSF will inhibit the flow of heat. Try to use a good pasta. Most HSF has brought pasta package gray. Quality of pasta is already practically standard.
- Do not do overclock the processor and the system if not forced, as this will make the processor more heat, being forced to work beyond the capacity. If you need to lower the frequency, so that the temperature went down.
- Use a software that can turn off work when the processor is idle (not working). Lots of software that you can exploit for this purpose, such as rain water. Please look for similar software using google for help.
- Place the fan on the system and chassis, its function to remove heat from the computer. Without discarded, the existing heat in the computer will only turn place, and of course will make increasing heat
So will that could be written in this article, hopefully useful, thank you, I'm waiting for comments from the guests of honor.
........................
Related Articles :
Posting Komentar